|
| 모크: | 30개 |
| 가격: | 협상 가능 |
| 표준 포장: | 크기: 판지에 있는 430mm*132mm*487mm |
| 배달 기간: | 입금 후 30-60일 |
| 지불 방법: | T/T, 서부 동맹, MoneyGram |
| 공급 능력: | 300개 PCS (개인휴대통신) 한 달 |
Stage Power Amplifier offering high power output and wide dynamic range audio reproduction for professional sound systems
Description
1, Power Output: The amplifier provides a power output of 2 X 1500W. This means that each channel is capable of delivering 900W of power. With two channels available, the total power output is 1800W. This power level is suitable for driving medium to large-sized sound systems, including main speakers, subwoofers, or monitor speakers.
2, Class H Amplification: Class H amplifiers are known for their efficiency and ability to handle wide dynamic range signals. These amplifiers utilize multiple power supply voltage rails that dynamically adjust based on the input signal level. This allows the amplifier to deliver power efficiently while maintaining high fidelity and low distortion during both quiet passages and peak moments.
3, Wide Dynamic Range: The amplifier is designed to handle wide dynamic range audio signals, which means it can accurately reproduce both soft and loud sounds without distortion or compression. This is particularly important in sound reinforcement applications where the audio content may vary greatly in volume.
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
| Specifications | ||
| Load Impedance | 4Ω | 8Ω |
| Stereo Output | 2 X 2000W | 2 X 1500W |
| Bridge Output Power | 3600W | 2800W |
| Input Impedance | 20K OHMS | |
| Frequency Response | 10Hz-20KHz +/-1dB | |
| Total Harmonic Distortion | ＜0.02% | |
| Slew Rate | 40V/μS | |
| Signal Noise Ratio | ＞105dB | |
| Damp Modulus 8Ω | ＞250 | |
| Output Category | ClassH | |
| Cooling | Two Cooling Fans | |
| Input Sensitivity | 0.75V | |
| Input Voltage | 180V-240V | |
| Protection | Short circuited/DC/Overload/Turnon delay/High temperature(Optional) | |
| Dimensions (W x H x D), mm | 430mm*132mm*487mm | |
| Gross Weigh | 35KG | |
| Packing Dimensions | 0.08m³ | |
비디오
|
|
| 모크: | 30개 |
| 가격: | 협상 가능 |
| 표준 포장: | 크기: 판지에 있는 430mm*132mm*487mm |
| 배달 기간: | 입금 후 30-60일 |
| 지불 방법: | T/T, 서부 동맹, MoneyGram |
| 공급 능력: | 300개 PCS (개인휴대통신) 한 달 |
Stage Power Amplifier offering high power output and wide dynamic range audio reproduction for professional sound systems
Description
1, Power Output: The amplifier provides a power output of 2 X 1500W. This means that each channel is capable of delivering 900W of power. With two channels available, the total power output is 1800W. This power level is suitable for driving medium to large-sized sound systems, including main speakers, subwoofers, or monitor speakers.
2, Class H Amplification: Class H amplifiers are known for their efficiency and ability to handle wide dynamic range signals. These amplifiers utilize multiple power supply voltage rails that dynamically adjust based on the input signal level. This allows the amplifier to deliver power efficiently while maintaining high fidelity and low distortion during both quiet passages and peak moments.
3, Wide Dynamic Range: The amplifier is designed to handle wide dynamic range audio signals, which means it can accurately reproduce both soft and loud sounds without distortion or compression. This is particularly important in sound reinforcement applications where the audio content may vary greatly in volume.
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
| Specifications | ||
| Load Impedance | 4Ω | 8Ω |
| Stereo Output | 2 X 2000W | 2 X 1500W |
| Bridge Output Power | 3600W | 2800W |
| Input Impedance | 20K OHMS | |
| Frequency Response | 10Hz-20KHz +/-1dB | |
| Total Harmonic Distortion | ＜0.02% | |
| Slew Rate | 40V/μS | |
| Signal Noise Ratio | ＞105dB | |
| Damp Modulus 8Ω | ＞250 | |
| Output Category | ClassH | |
| Cooling | Two Cooling Fans | |
| Input Sensitivity | 0.75V | |
| Input Voltage | 180V-240V | |
| Protection | Short circuited/DC/Overload/Turnon delay/High temperature(Optional) | |
| Dimensions (W x H x D), mm | 430mm*132mm*487mm | |
| Gross Weigh | 35KG | |
| Packing Dimensions | 0.08m³ | |
